Airlink101 AR410W

From TechInfoDepot
Jump to: Navigation, search


Airlink101 AR410W
Airlink101 AR410W-01.jpg
Super G™ Wireless Router

Homepage
Support

AR410W

Wikipedia

wikipedia:Main Page

WikiDevi

Airlink101 AR410W

dd-wrt

Incompatible

OpenWRT

Status Unknown

Tomato

Status Unknown

TomatoUSB

Status Unknown

Gargoyle

Status Unknown

Product page

OEM Global Sun Technology, invalid FCC ID

The specs are mentioned here.

Since it shares the same Global Sun parent model, it is probably quite similar to the D-Link DI-624 rev C2/C3. Device is assumed to have 8 MB RAM.

Per the manual, the default SSID may be default.

Specs[edit]

Platform

Serial Num. = ?
FCC ID = O7J-WLRT2454-QA0
Industry Canada ID = ?
CPU Type = Atheros AR2313A
MIPS Rev = ?
CPU Speed = ?
Bus = ?
Flash Type = ?
Flash Chip = Macronix MX29LV800BTC-90
Flash Size = 1MB
Max Firmware Size = ?
RAM Size = 8 MB
RAM Chip = ?
nvram Size = ?
ETH chip1 = Atheros AR2313A
Switch = Marvell 88E6060
Port-based vlan = ?
802.1q vlan = ?
Ethernet Port Count = 1-10/100-WAN 4-10/100-LAN
Wired Standard = IEEE 802.3/3u
Ethernet interface OUI = ?
boot_wait = ?
bootloader = ?
Flash Card Socket/Type = ?
SD/MMC Mod Support = ?
Expansion IF types = ?
PoE = ?
Power = 5VDC/2.5A
Connector type/size = ?
LEDs/Color = ?
Size = 150 x 115 x 30mm (L x W x H)
USB = ?
Serial Port = ?
JTAG Port = ?
Supported by TJTAG/Version = ?
Special Features = ?

Radio

Wireless Radio = Atheros AR2112
WLAN DSP processor = Atheros AR2313A
Wireless interface OUI = none specified
Antenna Connector Type = none
MIMO status = N/A
Wireless Standard = IEEE 802.11b/g
WiFi Operating Frequency = 2.4 GHz
 802.11g = 6, 9, 12, 18, 24, 36, 48, 54, Up to 108 Mbps
 802.11b = 1, 2, 5.5, 11 Mbps
Radio cor_rev = ?
Radio Capabilities = ?

Other

Default IP address: 192.168.1.1
Default login user: admin
Default login password: admin

Links of Interest[edit]

Flashing[edit]

50px NOTE:

During configuration or flashing a device, the only things that should be hooked to the device is the computer and power.

Flashing DD-WRT[edit]

Flashing Tomato(USB)[edit]

Upgrading[edit]

Reverting[edit]

JTAG-Serial Info[edit]

JTAG[edit]

JTAG Pinouts[edit]
JTAG Recovery[edit]

Serial[edit]

Serial Pinouts[edit]
Hyper terminal Setup in Windows XP
In Windows XP, Click Start Button - All Programs - Accessories - 
   Communication - HyperTerminal
Enter a name for the connection, Click ok
Choose com port you adapter is plugged into, Click ok
Set:
 Bits per second = 115200
 Data Bits = 8
 Parity = none
 Stop bits = 1
 Flow control = none
Click ok
Click File - Save As, and select a place to save it to so you 
             don't have to enter the settings again.
Putty Setup in Windows XP
After installing putty, run it
 Serial line = The COM port your using for serial (ie. COM3)
 Speed = 115200
Click on Serial under Connection
 Serial line to connect to = same as above (Serial line)
 Speed (baud) = 115200
 Data bits = 8
 Stop bits = 1
 Parity = none
 Flow control = none
Click Session
 Enter a name for your connection under saved sessions
Click Save
Click Open


Serial Recovery[edit]

USB Info[edit]

vlan Info[edit]

Pictures[edit]

Notes[edit]

Hardware Modification[edit]